Building energy modelling

Understand how your building design performs in an energy model, compare alternatives and identify the specifications your project needs.

Green Analytics provides energy modelling for building design studies and project-specific performance assessments. Our Advanced Energy Modelling performance solutions connect the design question with modelled results and practical technical reporting for your project team.

Building energy model displayed on a workstation monitor

Modelling for your design decision

The purpose of the assessment determines the model and the evidence it needs to produce. We offer two related types of work:

Your project needs Our modelling work
Compare design options Test the effect of glazing, shading, insulation, building form or relevant system choices against an agreed energy objective. Compare selected options while keeping other assumptions consistent.
Support a performance assessment Model the proposed design against a defined reference building where that verification approach applies. Document the comparison and the fabric or services specifications associated with the assessed design.

An early design study can inform choices before the details are settled. An assessment prepared for a formal purpose follows the requirements of that particular assignment. A general design comparison does not replace the required verification work.

How we develop the model

Building energy modelling uses software to calculate energy use for a defined building and set of operating conditions. The model brings together geometry, construction, systems, use and weather information at the level needed for the study.

  1. Define the question. We identify the decision or assessment objective, the drawings being assessed and the cases to compare.
  2. Build the model. We represent the relevant building geometry, surroundings and shading, then apply the fabric, systems and operating assumptions needed for the assignment. Unresolved details are recorded as assumptions.
  3. Test the agreed cases. We run simulations and examine differences between the options or between the proposed and reference cases. Further tests can investigate which design changes influence the result.
  4. Explain the findings. We interpret the results, identify their limits and document the design implications in the modelling report.

What you receive

You receive modelled findings with technical interpretation. The reporting package is matched to the study and can include:

  • Tables or graphs comparing the assessed cases.
  • The modelling basis, inputs, schedules and assumptions needed to understand the results.
  • Glazing performance and insulation specifications arising from the analysis.
  • Construction-layer details and marked plans or elevations showing the assessed requirements, where included in the assignment.
  • Commentary on design options, limitations and matters needing further investigation.

A focused options study and a detailed reference-building assessment require different reporting depth. The agreed scope identifies the components to be delivered.

Information to start with

Send the available plans, elevations and sections, along with the project location, design stage and the question or assessment request. Early drawings can provide a starting point; you do not need to settle every specification before making an enquiry.

As the study develops, relevant information may include site orientation and shading, construction details, glazing, lighting, heating and cooling systems, and occupancy or operating schedules. The required detail depends on the modelling purpose. Some specifications, including glazing and insulation performance, may be determined through the modelling rather than supplied at the start.

Using the results as the design develops

Results describe the design and assumptions assessed. They support a decision; they are not measured operating performance or a guaranteed energy bill, saving, rating or approval.

If drawings, specifications or operating assumptions change, the earlier result may need to be revisited. We can assess the changed design; the additional scenarios and reporting are agreed for that work.

Daylight, thermal comfort and rating assessments have their own objectives and requirements. Related analysis can be coordinated where needed, but it is not automatically included in every energy modelling study.

Discuss your energy modelling project

Tell us what you are designing, which decision you need to make and what information is available. If the work responds to a specific assessment request, include that request so the modelling can address its intended purpose.

For the broader service range, explore building design and assessment services.